Olivine Sand 60 mesh

Why Choose Olivine Sand 60 Mesh for Abrasive Blasting?

Olivine sand is a magnesium iron silicate mineral prized for its high specific gravity, angular particle shape, and exceptionally low free-silica content. In the 60 mesh grade, it offers an ideal balance between cutting speed and surface profile, making it a reliable choice for general industrial blasting, maintenance painting preparation, and concrete surface profiling.

Unlike silica sand, olivine generates significantly less respirable dust, helping you comply with stricter occupational health and safety regulations. Its high bulk density means more mass per blast stream, translating to faster cleaning rates and lower media consumption per square meter. The angular grains fracture on impact, continuously exposing fresh cutting edges, which maintains a consistent anchor pattern for coating adhesion.

Typical Applications for Olivine Sand 60 Mesh

This versatile 60 mesh grade is specified across multiple industries and surface preparation tasks:

• Structural steel blasting: Removes mill scale, rust, and old coatings before applying industrial primers and protective coatings.
• Concrete surface preparation: Profiles smooth concrete floors and walls to improve the bond of epoxy, polyurethane, and other overlay systems.
• Maintenance and repair operations: Ideal for field blasting of bridges, tanks, pipelines, and process equipment where silica dust control is critical.
• Marine and offshore: Suitable for hull blasting and deck preparation when used with appropriate containment and dust extraction systems.

Handling and Selection Guidance

To get the best results from Olivine Sand 60 mesh, consider these practical points:

• Blast pressure and nozzle size: A 6 mm to 8 mm nozzle orifice at 90–100 psi typically delivers optimal productivity. Adjust pressure based on substrate condition and desired profile depth.
• Media recycling: Olivine fractures during impact, so it is generally used as a single-pass expendable abrasive. For multi-pass recycling, evaluate the breakdown rate against your dust collector capacity and sieve mesh size.
• Moisture control: Store bags and bulk containers in a dry, covered area. Damp media can clump and cause inconsistent metering in blast pots. Use an air dryer or moisture separator on your compressed air line.
• Dust management: Although olivine is low in free silica, all dry blasting generates airborne particulate. Always use approved respiratory protection, containment, and LEV (local exhaust ventilation) as per local regulations.

About SPA2Z — Your Source for Olivine Sand 60 Mesh

SPA2Z focuses on supplying industrial blasting and surface preparation products that help you work safer and faster. When you source Olivine Sand 60 mesh from us, you get practical support to match the right grade and pack size to your blasting setup—whether you operate a small pressure pot in a fabrication shop or run multiple blast nozzles on a major coating project.

We understand that abrasive performance depends on consistent sizing, low dust generation, and reliable packing. That's why we offer flexible pack configurations—including 25 kg bags, 50 kg bags, 1-ton jumbo bags, and bulk totes—to suit your storage, handling, and consumption needs. Our team can assist with grade selection, compatibility checks for your blast equipment, and logistics planning for domestic and export deliveries.

Tell us your substrate, desired surface profile, and monthly consumption, and we'll provide a competitive quotation for Olivine Sand 60 mesh. Use the enquiry form on this page to get started.