Crushed Glass 60/80 mesh

Angular Recycled Glass Abrasive for Industrial Blasting

SPA2Z supplies Crushed Glass 60/80 mesh as a high-performance alternative to traditional expendable abrasives. Manufactured from 100% recycled container glass, the angular particle shape creates a sharp etch on surfaces, making it ideal for removing rust, mill scale, and thick coatings efficiently. The 60/80 mesh size strikes a balance between cutting speed and surface profile, suitable for a wide range of general industrial blasting applications.

Unlike mineral slags or silica sand, crushed glass contains less than 1% free silica, significantly reducing the risk of silicosis for operators. It produces a clean, white-metal finish with low embedment and minimal dust when used with proper blasting equipment. The media is non-conductive, non-flammable, and chemically inert, making it safe for use in sensitive environments.

Performance and Surface Profile

This 60/80 mesh grade is commonly specified for achieving a surface profile of 2.5 to 4.0 mils, depending on blast pressure, standoff distance, and substrate hardness. The angular grit cuts faster than round glass beads, reducing blasting time and abrasive consumption. It is compatible with both suction-fed and pressure-fed dry blasting systems, as well as some wet blasting setups.

SPA2Z helps buyers select the correct mesh size and pack configuration for their specific project. Whether you need a single pallet for a small job or bulk totes for continuous production blasting, we arrange supply with consistent grading and cleanliness.

About SPA2Z — Crushed Glass 60/80 Mesh Supply

SPA2Z is a focused supplier of industrial blasting equipment, surface preparation consumables, and abrasive media. For buyers of Crushed Glass 60/80 mesh, we provide practical procurement support: confirming current stock availability, arranging pack sizes from 25 kg bags to 1-ton jumbo totes, and coordinating dispatch to your facility or project site.

Our team understands abrasive blasting operations and helps you verify that the 60/80 mesh grade matches your equipment and surface finish requirements. We quote competitively based on quantity and destination, and we keep communication straightforward—no inflated claims, just reliable abrasive supply.

• Assistance with mesh size and pack selection for your blasting setup
• Quotation for 25 kg, 50 kg, 1-ton tote, and bulk drum packs
• Supply coordination for contractors, workshops, and distributors